Build a Wi-Fi Photo Transfer NAS Server with This Dual-Bay Docking Station

Note: Compatible with both laptops and Raspberry Pi devices. Hard disks are not included.

• This high-performance, cost-effective Dual-Bay USB 3.0 docking station lets you repurpose both old and new hard drives.
• The kit includes the TurboLayer NAS software preloaded on a USB stick, making setup effortless.
• Supports both 3.5-inch and 2.5-inch SATA III hard drives with transfer speeds of up to 6 Gbps.
• Each bay supports up to 18TB, for a total capacity of 36TB.
• Simply connect the Dual-Bay docking station and the TurboLayer USB Stick to your laptop, and your Photo Transfer Server is ready to go.

Packing List

Power for the Dual Bay HDD Docking Station

turbotenna

The Dual Bay HDD Docking Station requires a 15–21V laptop power adapter with a 5.5 x 2.1 mm plug to power the included 12V power module.

This setup ensures a stable 12V output for your hard drives.

About the 5.5 x 2.1 mm Plug:

• 5.5 mm: Outer diameter of the plug.
• 2.1 mm: Inner diameter (pin hole) of the plug.
• This is a common type of DC power plug used for laptops and other electronics.

If needed, you can use a 5.5 x 2.1 mm plug splitter on the laptop power adapter to power both the laptop and the 12V power module at the same time.

5.5 x 2.1 mm SOCKET ===> 5.5 x 2.1 mm PLUG to Laptop
                                 ||
                                 ===> 5.5 x 2.1 mm PLUG to 12V Power Module

Check Your Hard Drive Interface

The TurboLayer Cable supports hard drives with a SATA interface only. It is not compatible with IDE interfaces. Please ensure your hard drive uses a SATA connection before placing an order.

turbotenna

Don't Forget to Specify Your Computer Platform

The kit works with both Windows 10/11 laptops and Raspberry Pi devices running the Bookworm OS.

Please make sure to specify which version of the TurboLayer USB Stick you need.

turbotenna